Kathrein MSK 125 - Manual (Page 21)

21
SAT
BUTTON Frequency in MHz Bandwidth
SELECT SOUND CARRIER
[1] 5.80 wide Mono
[2] 6.50 wide Mono
[3]
6.65 wide Mono
[4]
7.02 narrow
[5] 7.20 narrow
[6] 7.38 narrow
[7] 7.56 narrow
[8]
7.74 narrow
[9]
7.92 narrow
[0] Stereo (select left channel fi rst)
Command overview for SAT audio carrier frequencies
Launch the audio carrier menu
... Select audio carrier
or Change audio carrier frequency in 10 kHz
intervals
Manually switch audio carrier bandwidth
wide = 280 kHz, narrow = 150 kHz
Exit the audio carrier menu
Example
Call the 7.38 MHz audio carrier
Press
LC display:
• Audio sub-carrier: 7.38 MHz
• Audio carrier bandwidth: Narrow = 150 kHz
• Operating mode: SAT analogue
After the SAT analogue mode is called the MSK 125 is always
set to 7.02 MHZ audio carrier. Frequency changes to the audio
carrier are only kept until you exit the SAT analogue mode.
To set the headphones output to “Stereo”, fi
rst select the
desired left channel and then confi rm by pressing the “0” button.
The headphones output now delivers the 7.02 and 7.20 MHz stereo
sound.
Note
Example