Kathrein MSK 125 - Manual (Page 24)

24
SAT
Command overview for LNB voltage
Call the LNB menu
... Select LNB voltage
or Change LNB voltage in 0.1 V intervals
22 kHz signal on/off
Exit the LNB menu
Example
Calling up 14 V LNB voltage:
Press the buttons
LC display:
• LNB voltage: 14 V
• Current consumption: 150 mA
By pressing the or button you can change the LNB
voltage in 0.1 V intervals.
Press to exit the LNB menu.
Note
Example
Switching on the 22 kHz signal
Press the button
LC display:
• LNB voltage: 14 V
• Current consumption: 150 mA
• 22 kHz signal switched on
Press the button again to switch off the 22 kHz signal.
Press to exit the LNB menu.
Note