Kathrein MSK 125 - Manual (Page 22)

22
Example
Switching on the 22 kHz signal
Press the button
LC display:
• LNB voltage: 14 V
• Current consumption: 150 mA
• 22 kHz signal switched on
Press the button again to switch off the 22 kHz signal.
Press to exit the LNB menu.
Note
SAT
FREQUENCY DISPLAY AND ENTRY
To measure the level of a reception signal, you must fi rst enter the
desired frequency. The LC display indicates the frequency and the
measured level. The frequency can be entered from 920 MHz to
2150 MHz in 100 kHz intervals.
COMMAND OVERVIEW OF SAT FREQUENCY ENTRY
Switch to satellite reception (analogue or digital)
... Enter frequency
Frequency can be changed in 100 kHz intervals
Confi rm entry
Example
To enter the frequency 1236 MHz:
Press
LC display:
• Frequency: 1236.0 MHz
• Operating mode: SAT
• Level: 86.5 dBµV D (D = digital)
DIGITAL SAT RECEPTION
In SAT mode the MSK 125 can be adjusted to “Analogue” and “DVB S(2)” reception types.