Lucent Technologies Voice Terminal 8411 - Manual (Page 22)

19
Using the Softkeys to Activate a Feature
Your display and softkeys allow you to access up to 12 switch-related features. For example, you
may want to use the Priority Calling feature to call another extension with a distinctive 3-burst
ring. You can activate this feature with the softkeys in the following way:
To access a feature with the
softkeys (Priority Calling is
used in this example) 1 Press
•
The display shows the initial feature option screen:
2 Press
•
The display shows:
Menu
LWC CnLWC AutCB Timer
Next
CFrwd CPark TmDay PCall
3 To use the Priority Calling feature, press the softkey below
PCall and then dial the extension.
Note: When the feature is activated, after the display screen
shows you the digits you are dialing, an arrow appears above
the feature, as in the example below. If there is not an arrow
above the feature, the feature is off.
When both parties hang up from the call, the arrow above
PCall (showing feature status indication) disappears.
CFrwd CPark TmDay PCall