Lucent Technologies Voice Terminal 8411 - Manual (Page 51)

48
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, TmDay, appears on the second line of one of the feature option screens.
To see the number you last
dialed 1 Press and then press the softkey below View
or, if View is not available on your display,
press
2 Press the softkey below Last
or, if Last is not available on your display,
press
or Dial Last Number Dialed code __________
Time/Date
To see date and time 1 Press and then press the softkey below TmDay
or, if TmDay is not available on your display,
press
•
Display returns to Normal Mode after a few seconds
Timer
Menu
Stored
LastDialed
Menu
Date/Time
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature name, Timer, appears on the second line of one of the feature option screens.
To see elapsed time (hours,
minutes, seconds) 1 Press and then press the softkey below
Timer
or, if Timer is not available on your display,
press
•
Elapsed time is shown
2 To stop timer and clear display, press and
then press the softkey below Timer again
or, if Timer is not available on your display,
press
again
•
Elapsed time is displayed on the screen for about four
seconds and then disappears
Menu
Timer
Menu
Timer