Lucent Technologies Voice Terminal 8411 - Manual (Page 34)

31
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, IAuto (for Automatic Intercom feature), or IDial (for the Dial Intercom
feature) appears on the second line of one of the feature option screens.
To make a call to your
predetermined Automatic
Intercom partner 1 If you are using an 8411 with a display, press and then
press the softkey below IAuto
(while off-hook)
If your 8411 does not have a display or if IAuto is not
available on your display, press
(while off-
hook) [ringback tone]
•
Special intercom ring is sent
Note: If call is unanswered, press while call is
ringing if you want to redirect it to coverage.
Menu
IcomAuto xxx
Go to Cvr
To dial a call to a member of
your Dial Intercom group 1 If you are using an 8411 with a display, press and then
press the softkey below IDial
(while off-hook)
If your 8411 does not have a display or if IDial is not
available on your display, press
(while off-hook) [dial tone]
•
Green light goes on steadily
2 Dial group member’s 1- or 2-digit code
[ringback tone]
•
Special intercom ring is sent
Note: If call is unanswered, press while call is
ringing if you want to redirect it to coverage.
To answer any
intercom call 1 Pick up handset
•
You are connected to call
Note: If you are active on another call, first
press
, then press flashing . To return
to the held call, press the of the held call.
Menu
IcomDial xxx
Go to Cvr
Hold xxxxx
xxxxx