Lucent Technologies Voice Terminal 8411 - Manual (Page 41)

38
Note: Your voice terminal is set for either the Speaker (listen-only) or the Speakerphone (listen
and talk) function. Check with your system manager to see which of these two features you can
use.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
Speaker
To place a call without lifting
the handset, or to use speaker
with any listening-only
feature activity (such as,
monitoring a call on which
you have been put on hold or
for group listening) 1 Press
•
Red light next to goes on;
red light next to goes on
2 Place call or access selected feature
3 Adjust speaker volume if necessary
•
To raise the volume, press the right half of the Speaker
Volume control button labeled
;
to lower the volume, press the left half of the Speaker
Volume control button labeled
Speaker
Speaker
Mute
Note: In order for the other
party to hear you, you must
speak through the handset.
•
If you have a display, it shows:
(There are eight possible volume settings. On the display,
one arrow is the lowest setting, and eight arrows is the
highest setting.)
To turn off the speaker and
return to handset 1 Pick up handset
•
Red light next to and red light next
to go off
•
Speaker goes off
SPEAKER L>>>>> H
Speaker
Mute