Lucent Technologies Voice Terminal 8411 - Manual (Page 44)

41
Test/Diagnostics
To test the lights and the
display on your voice terminal 1 While on-hook or off-hook, press and hold
•
Red light next to goes on
Note: If the red light next to flashes rather than
goes on steadily, it means that the voice terminal is not
communicating with the PBX. In such a case, see your
system manager.
•
The lights go on steadily in two groups, and, if your 8411
has a display, all the display segments fill in
2 To end test, release
•
Lights return to pretest state; red light next
to
goes off
Note: If the display or the lights do not respond during the
test, notify your system manager.
✔
Test
Test
Test
Test
Test
To perform a diagnostics test
of the PassageWay connection
and the status of the Analog
Adjunct (if either of these is
connected to your 8411 set) 1 Press
2 Press
•
The red and green lights go on next to Buttons #9 and/or
#10 to indicate the status of these two functions. For more
information on the meaning of the PassageWay and
Analog Adjunct lights, see “PassageWay and Analog
Adjunct Status Indications.”
Note: If you press any voice terminal buttons or if you receive
or place a call during the diagnostics test, the test is terminated
and the voice terminal returns to Normal Mode.
Transfer
Shift
Test
✔