Lantronix Device Server UDS 10 - Manual (Page 103)

Binary to Hex
UDS-10 User Guide 9-1
9. Binary to Hex Conversion
Many of the Device Server’s configuration procedures require you to assemble a series of
options (represented as bits) into a complete command (represented as a byte). The resulting
binary value must be converted to a hexadecimal representation.
Hexadecimal digits have values ranging from 0 to F, which are represented as 0-9, A (for 10),
B (for 11), etc. To convert a binary value (for example, 0010 0011) to a hexadecimal
representation, the upper and lower four bits are treated separately, resulting in a two-digit
hexadecimal number (in this case, 4C).
Use the following table to convert values from binary to hexadecimal.
Table 35 - Binary to Hexadecimal Conversion Table
Decimal Binary Hex
0 0000 0
1 0001 1
2 0010 2
3 0011 3
4 0100 4
5 0101 5
6 0110 6
7 0111 7
8 1000 8
9 1001 9
10 1010 A
11 1011 B
12 1100 C
13 1101 D
14 1110 E
15 1111 F