Lantronix Device Server UDS 10 - Manual (Page 94)

UDP
8-8 UDS-10 User Guide
8.3.1 Channel Parameters
Use the following table to select setup record parameters for Channels 1:
Table 22 - Channel Parameters
Byte(s)
(Channel 1) Function
16 Interface Mode (see Table 23 - Interface Mode Options )
17 Line Speed
Bits 7-5: Reserved
Bits 4-0: Baud Rate (see
Table 25 - Baud Rate Settings )
18 Flow Control (see Table 26 - Flow Control Options )
19 Reserved
20-21
Own TCP port low-byte, high-byte (Intel)
22-23 Remote TCP port low byte, high-byte (Intel)
24-27 Remote IP address (low/high low/high)
28 Connect Mode (see Table 27 - Connect Mode Options )
29 Disconnect Mode (see Table 28 - Disconnect Mode Options )
30 Disconnect w/ inactivity time-out, minutes (00 if unused)
31 Disconnect w/ inactivity time-out, seconds (00 if unused)
32-33 Characters to trigger send immediately (sendchar)
34 Flush mode (see Table 29 - Flush Mode Options )
35 Pack Control (see Table 30 - Pack Control Options )
36-47 Reserved (0)
48-63 a) Terminal name for Telnet terminal type option (15 characters max),
0-terminated. If set and Bit 6 in Disconnect Mode is set, Telnet
connection will be assumed.
b) Password for Passworded Socket Connection (Bit 4 in Disconnect
Mode Set).