Lantronix Device Server UDS 10 - Manual (Page 44)

Configure
3-4 UDS-10 User Guide
3.3 Web Manager Page
Note: The UDS-10-IAP may not have a web page or may use a different format web page.
You can start a web browser for configuration by opening your JAVA enabled web browser
and entering the IP address or by clicking the Web Configuration button on the Device
Management window. The Lantronix Web Manager page will display.
Figure 11 - Lantronix Web-Manager
Web Manager 3.0 has the following buttons:
• Unit Configuration
• Server Properties
• Port Properties
• Factory Settings1 (also Factory Settings2 for devices with two serial channels)
• Update Settings
• Channel 1 (also Channel 2 for devices with two serial channels)
• Tech Support
• FTP – Site
• Back to Web-Manager
• Contact Us
1. Use the menu (pushbuttons) to navigate to sub pages where you can configure server
settings. See explanations of the configuration parameters later in this chapter.
2. When you are finished, click the Update Settings button to save your settings.