Setup, 2 setup -3 – Lantronix Device Server UDS 10 User Manual
Page 77
Advertising
Firmware
UDS-10 User Guide
5-3
5.1.2 Setup
1. Open Control Panel.
2. Double click on the “DeviceComm Manager” Icon
.
Status
Meaning
DISABLED
Unused port on your system
N/A
Port being used by other hardware / software on your system
IDLE
An IP address and port number have been associated with the COM port
CONNECTED
An active TCP/IP connection exists between the COM port and the device server
3. Select one of the DISABLED ports by clicking on it, and then press the Edit button.
4. Select
the
Enabled check box.
5. Type in the IP address of the target device server in the “Host:” section.
Advertising