LSI MegaRAID Enterprise 1600 User Manual
Page 110
Advertising
MegaRAID Enterprise 1600 Hardware Guide
96
11
Enter a name for the cluster (up to 15 characters), and click on Next. (In our example, the
cluster is named ClusterOne.)
12
Type the user name of the Cluster Service account that you created during the pre-
installation. (In our example, the user name is cluster.) Do not enter a password.
Type the domain name, then click on Next.
At this point the Cluster Service Configuration Wizard validates the user account and
password.
13
Click on Next.
The Add or Remove Managed Disks screen displays next. This screen is in the following
section about configuring cluster disks.
Advertising