LSI MegaRAID Enterprise 1600 - Manual (Page 74)

MegaRAID Enterprise 1600 Hardware Guide 60
SCSI Termination, Continued
Connecting Non-Disk SCSI Devices SCSI Tape drives, scanners, CD-ROM drives, and other non-disk drive
devices must each have a unique SCSI ID regardless of the SCSI channel they are attached to. The
general rule for Unix systems is:
• tape drive set to SCSI ID 2
• CD-ROM drive set to SCSI ID 5
• all non-disk SCSI devices attached to SCSI channel A
Make sure that no hard disk drives are attached to the same SCSI channel as the non-disk SCSI
devices. Drive performance will be significantly degraded if SCSI hard disk drives are attached to
this channel.