LSI MegaRAID Enterprise 1600 - Manual (Page 55)

Chapter 5 Configuring MegaRAID 41
Configuration Strategies, Continued
Maximize Drive Availability You can maximize the availability of data on the physical disk drive in the logical
array by maximizing the level of fault tolerance. The levels of fault tolerance provided by the
RAID levels are:
RAID Level Fault Tolerance Protection
0 No fault tolerance.
1 Disk mirroring, which provides 100% data redundancy.
3 100% protection through a dedicated parity drive.
5 100% protection through striping and parity. The data is
striped and parity data is written across a number of physical
disk drives.
10 100% protection through data mirroring.
30 100% protection through data striping. All data is striped
across all drives in two or more arrays.
50 100% protection through data striping and parity. All data is
striped and parity data is written across all drives in two or
more arrays.
Maximizing Drive Performance You can configure an array for optimal performance. But optimal drive
configuration for one type of application will probably not be optimal for any other application. A
basic guideline of the performance characteristics for RAID drive arrays at each RAID level is:
RAID Level Performance Characteristics
0 Excellent for all types of I/O activity, but provides no data
security.
1 Provides data redundancy and good performance.
3 Provides data redundancy.
5 Provides data redundancy and good performance in most
environments.
10 Provides data redundancy and excellent performance.
30 Provides data redundancy and good performance in most
environments.
50 Provides data redundancy and very good performance.