Step 9 install megaraid card – LSI MegaRAID Enterprise 1600 User Manual
Page 80
Advertising
MegaRAID Enterprise 1600 Hardware Guide
66
Step 9 Install MegaRAID Card
The MegaRAID card can plug into a 32-bit or 64-bit PCI slot that receives 5 V, and, optionally,
3.3 V through the motherboard. Choose a PCI slot and align the MegaRAID controller card bus
connector to the slot. Press down gently but firmly to make sure that the card is properly seated in
the slot. The bottom edge of the controller card should be flush with the slot.
Insert the MegaRAID card in a PCI slot as shown below:
Screw the bracket to the computer frame.
Advertising