Lenovo TS100 User Manual
Page 100
Advertising
To remove a hot-swap power supply, complete the following steps:
1. Read the safety information that begins on page vii and “Installation guidelines”
2. Disconnect the power cord from the power supply that is to be removed.
3. Press down on the orange release lever
1 and pull the power supply 2 out
of the bay, using the handle.
4. If you are instructed to return the power supply, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
82
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual
Advertising