Lenovo TS100 - Manual (Page 36)

EasyStartup program detects installed hardware devices and guides you through
the process of creating a response file and performing an unattended installation
of the operating system and associated device drivers.
For more information about the ThinkServer EasyStartup DVD, see “Using the
ThinkServer EasyStartup DVD” on page 23.
v ThinkServer EasyUpdate program
The ThinkServer EasyUpdate program allows you to download and install
updates for your specific server or server systems. Updates can be device
drivers, BIOS and firmware updates, or software updates.
v Mini-baseboard management controller utility programs
Use these programs to configure the mini-baseboard management controller, to
update the firmware and sensor data record/field replaceable unit (SDR/FRU)
data, and to remotely manage a network. For information about using these
programs, see “Using the mini-baseboard management controller utility
programs” on page 26.
v Boot Menu program
The Boot Menu program is part of the BIOS code. Use it to override the startup
sequence that is set in the Configuration/Setup Utility program and temporarily
assign a device to be first in the startup sequence. For information about using
this program, see “Using the Boot Menu program” on page 29.
v Broadcom NetXtreme Gigabit Ethernet Boot Agent
The Broadcom NetXtreme Gigabit Ethernet Boot Agent is part of the BIOS. You
can use it to configure the network as a startable device, and you can customize
where the network startup optional devices occur in the startup sequence. Enable
and disable the Broadcom NetXtreme Gigabit Ethernet Boot Agent from the
Configuration/Setup Utility program. For information, see “Enabling the Broadcom
NetXtreme Gigabit Ethernet Boot Agent” on page 30.
v Broadcom NetXtreme Gigabit Ethernet controller configuration
To configure the integrated Gigabit Ethernet controller, see “Configuring the
Broadcom NetXtreme Gigabit Ethernet controller” on page 30.
v LSI Configuration Utility program
Use the LSI Configuration Utility program to configure the integrated SAS/SATA
controller with RAID capabilities and the devices that are attached to it. For
information about using this program, see “LSI Configuration Utility program” on
page 30.
The following table lists the different server configurations and the applications
that are available for configuring and managing RAID arrays.
Server configuration
RAID array configuration
(before operating system is
installed) RAID array management
(after operating system is
installed)
Integrated SATA and no SAS
controller card installed None None
SAS/SATA controller card
(LSI 1064e) installed LSI Utility (BIOS Utility
Ctrl+C) MyStorage (for monitoring
storage only)
ServeRAID-MR10i adapter
installed ServeRAID Manager
Hardware Boot CD, BIOS
Utility (Ctrl+A) ServeRAID Manager,
ARCCONF (CLI)
v Remote Supervisor Adapter II SlimLine configuration
18 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual