Lenovo TS100 - Manual (Page 152)

For information about using the diagnostic programs, see “Running the diagnostic
programs” on page 164.
To view the BMC system-event log that is generated by the mini-BMC controller
from the diagnostic programs, complete the following steps:
1. If the server is running, turn off the server and all attached devices.
2. Turn on all attached devices; then, turn on the server.
3. When the prompt F2 for Diagnostics is displayed, press F2. If you have set
both a power-on password and an administrator password, you must type the
administrator password to run the diagnostic programs.
4. From the top of the screen, select Hardware Info.
5. From the list, select BMC log.
134 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual