Lenovo TS100 User Manual
Page 145
Advertising
4. Install the eight screws
2 that secure the system board to the chassis.
5. Reinstall the Remote Supervisor Adapter II SlimLine support bracket
1 with
the two screws that you removed earlier.
6. Install any of the following components that you removed from the system
board:
v
SAS/SATA controller (see “Installing the SAS/SATA controller” on page 107
).
v
Battery (see “Installing the battery” on page 86).
v
DIMMs (see “Installing a memory module” on page 85).
Chapter 4. Removing and replacing server components
127
Advertising