Lenovo TS100 - Manual (Page 126)

6. Disconnect the mini-PCI-X enablement card from the mini-PCI-X enablement
card connector ; then, grasp the edges of the mini-PCI-X enablement card and
pull it out of the mini-PCI slot. If the standoff comes away from the system
board with the card, gently pull it out of the card and push it back into the hole
on the system board.
7. If you are instructed to return the mini-PCI-X enablement card, follow all
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Installing the optional mini-PCI-X enablement card
To install the optional mini-PCI-X enablement card, complete the following steps:
1. Touch the static-protective package that contains the mini-PCI-X enablement
card 2 to any unpainted surface on the outside of the server; then, remove
mini-PCI-X enablement card 3 from the package.
2. Position the mini-PCI-X enablement card over the mini-PCI slot 1 connector
and the plastic standoff. Press the mini-PCI-X enablement card firmly into the
mini-PCI slot connector and into the mini-PCI-X enablement card connector, and
then onto the plastic standoff.
108 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual