Diskette drive problems – Lenovo TS100 User Manual

Page 166

Advertising
background image

v

Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.

v

See Chapter 3, “Parts listing, ThinkServer TS100 Machine Types 6431, 6432, 6433, and 6434,” on page 37
to determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).

v

If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.

Symptom

Action

The CD or DVD drive tray is not
working.

1. Make sure that the server is turned on.

2. Insert the end of a straightened paper clip into the manual tray-release

opening.

3. Reseat the CD or DVD drive cable.

4. Replace the following components one at a time, in the order shown, restarting

the server each time:

a. CD or DVD drive cable

b. CD or DVD drive

Diskette drive problems

v

Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.

v

See Chapter 3, “Parts listing, ThinkServer TS100 Machine Types 6431, 6432, 6433, and 6434,” on page 37
to determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).

v

If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.

Symptom

Action

The diskette drive activity LED
stays lit, or the server bypasses
the diskette drive.

1. If there is a diskette in the drive, make sure that:

v

The diskette drive cables are correctly and securely connected.

v

The diskette drive is enabled in the Configuration/Setup Utility program.

v

The diskette is good and not damaged. (Try another diskette if you have
one.)

v

The diskette is inserted correctly in the drive.

v

The diskette contains the necessary files to start the server.

v

Your software program is working properly.

2. To prevent diskette drive read/write errors, make sure that the distance

between monitors and diskette drives is at least 76 mm (3 in.).

3. Replace the diskette drive.

148

ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual

Advertising
This manual is related to the following products: