Lanier LW 210 - Manual (Page 13)

2
Remove the upper copy guide.
3
Insert the original face down into
the table along the size indication.
✏
Do not release the original
until it is fed into the copier.
S
Set a leading margin of 5 mm, 0.2" or more when you copy an original whose
leading edge has a large solidly-shaded area.
☞
See page 11, "Setting a Leading/Trailing Edge Margin"
Recommended Paper
This section describes recommended paper sizes and types.
S
Standard paper sizes that can be used in this copier are shown below.
Metric version Inch version Manual feed table Roll feeder
A0 E (36"
×
48")
K K
A1 D (24"
×
36") K L K L
A2 C (18"
×
24")
K L K L
A3 B (12"
×
18")
K L K L
A4 A (9"
×
12") K K
BASIC
COPYING 5