Lanier LW 210 - Manual (Page 57)

COPY MAGNIFICATION/CUT LENGTH
ADJUSTMENT
This function adjusts the copy magnification and paper cut length in the paper
feed direction.
The copy magnification can be adjusted from -1 to 1 % in 0.05 % steps and the
paper cut length from -10 to 10 mm, -0.5 to 0.5" in 1 mm, 0.1" steps.
1
Press the Enter key until "A.1"
appears on the Trailing Edge
indicator.
The Trailing Edge indicator blinks.
The paper cut length indicator
lights.
2
Use the and keys to select
an item to be adjusted.
Select "A.1" for the copy
magnification adjustment or "A.2"
for the paper cut length adjust-
ment.
✏
When you press the Clear/
Stop key, "A.1" is displayed.
3
Press the Enter key.
The Trailing Edge indicator lights.
The paper cut length indicator
blinks.
MAINTAINING YOUR COPIER 49