Lanier LW 210 - Manual (Page 5)

R
Cautions:
o
•
After you move the copier, lock it in position with the caster fixture.
If you do not, the copier might move or fall causing personal injury.
m
•
Do not lean on the original tray or copy table otherwise they might
fall causing personal injury.
r
•
When you move the copier, unplug the power cord form the wall
outlet to avoid fire or electric shock.
t
•
When you pull out the plug from the socket, grip the plug to avoid
damaging the cord and causing fire or electric shock.
m
•
Keep the copier away from humidity and dust. A fire or an electric
shock might occur.
•
Do not place the copier on an unstable or tilted surface. If it
topples over it could cause injury.
r
•
When the copier will not be used for a long time, unplug the power
cord.
o
•
If you use this copier in a confined space, make sure there is a
continuous air turnover.
m
•
Do not reuse stapled paper. Do not use aluminum foil, paper
containing carbon or other conductive paper. A fire might occur.
n
•
When removing misfed paper, do not touch the fusing section
because it could be very hot.
R
•
This copier has been tested for safety using this supplier’s parts
and consumable. We recommend you only use these specified
supplies.
SAFETY INFORMATION
iii