Lanier LW 210 - Manual (Page 58)

4
Use the and keys to enter a
value to be set.
When you press the Clear/Stop
key, "0" is entered for the value to
be set.
5
Press the Enter key.
The Trailing Edge indicator blinks.
The paper cut length indicator
lights.
6
Repeat 2 to 5 for all the settings.
7
Press the Enter key until "A.1"
disappears from the Trailing Edge
indicator.
✏
You can also let "A.1" disap-
pear from the Trailing Edge
indicator by pressing the
Clear Modes key while the
indicator is blinking.
COPY MAGNIFICATION/CUT LENGTH ADJUSTMENT
50 MAINTAINING YOUR COPIER