Lanier LW 210 - Manual (Page 14)

S
When you make a copy on a non-standard size of paper, set the paper on
the manual feed table.
S
Paper of about the thickness of 51 to 134 g/m 2 , 14 lb to 36 lb is suitable for
this copier.
✏
Do not use the following paper. Otherwise, a paper jam might occur.
•
Bent, folded, or creased paper
•
Torn paper
•
Perforated paper
•
Non-smooth paper
•
Slippery paper
•
Thin paper that has low stiffness
✏
Do not make a copy on paper with any kind of coating, such as thermosen-
sitive paper, art paper, aluminum foil, and carbon paper. Otherwise, a fault
might occur.
S
If you make a copy on edged paper, the copy might be creased or a part of
the image might not be copied.
S
If you make a copy on rough paper, the copy image might be blurred.
S
When you make a copy on translucent paper, the copy might be waved.
S
When you make copies on film, take out the copies delivered to the copy
guide one sheet at a time and place them on a flat surface.
BASIC
6 COPYING