Lanier LW 210 - Manual (Page 28)

3
Press the Partial Copy key when
the leading edge of the area to be
copied comes to the position
where it is covered with the origin-
al table cover.
The indicator on the Partial Copy
key lights.
✏
If you do not press the Partial
Copy key, the original is deli-
vered without partial copying.
4
Press the Partial Copy key when
the trailing edge of the area to be
copied comes to the position
where it is covered with the origi-
nal table cover.
The indicator on the Partial Copy
key goes off.
✏
If you do not specify the
trailing edge, the copier will do
the following:
•
Cuts the paper automati-
cally according to the origi-
nal length when the synchro
cut function is selected.
•
Otherwise, cuts the paper in
the specified length.
•
The area to be copied might
differ slightly from the de-
sired one depending on the
timing of pressing the key.
Original feed direction
Original feed direction
PARTIAL COPYING
20 COPYING