Lanier LW 210 - Manual (Page 18)

Switching the Copy Exit
This function switches the copy exit direction to the upper or lower according to
the copy paper size.
S
Select the lower copy exit when copying onto A0, 36"
×
48"
K
or A1, 24"
×
36"
K
paper. If you use the upper copy exit to copy onto these paper,
delivered copies might remain inside the copier causing a paper jam.
S
Select the upper copy exit when copying onto A4
K
or 9"
×
12"
K
paper.
If you select the lower copy exit, copies might not be stocked properly.
S
When you turn on the copier, the message "upper copy exit" lights.
S
You can stock the following number of copies by using the upper copy exit.
If you stock copies exceeding these numbers, the paper might be jammed
or the image might be copied on the underside of the paper.
•
A4
L
~ A1
K
, A
L
~ D
K
- 25 sheets
•
Translucent paper - 10 sheets
S
When you select the lower copy exit and take copies out of the rear side of
the copier, you can stock up to 10 copies for A0, 36"
×
48"
K
or A1, 24"
×
36"
K
paper.
S
When you select the lower copy exit and take copies out of the front side of
the copier, you can stock only one copy.
S
When you copy onto A3, short grain paper, you can stock less copies than
those for A3, long grain paper.
1
Press the Copy Exit key to select
the direction in which copies are
delivered.
✏
" " lights for the upper copy
exit and " " for the lower
copy exit.
BASIC
10 COPYING