Lexmark 5021-0XX - Manual (Page 92)

2-14 Service Manual
5021-0XX
35 Res Save Off
Deficient Memory Printer lacks
memory needed to
enable Resource
Save. This
message usually
indicates too much
memory is allocated
for one or more of
printer link buffers. Press Go to disable Resource
Save and continue printing.
To enable Resource Save after
you get this message:
• Make sure link buffers are
set to Auto, and exit menus
to activate link buffer
changes.
• When Ready is displayed,
enable Resource Save from
the Setup Menu.
Install additional memory.
37 Insufficient
Collation Area Printer memory (or
hard disk, if
installed) does not
have free space
necessary to collate
print job. Press Go to print portion of job
already stored and begin
collating rest of job.
Press Menu to open Job Menu
and cancel current job.
37 Insufficient
Defrag Memory Printer cannot
defragment flash
memory, because
printer memory
used to store
undeleted flash
resources is full. Delete fonts, macros, and
other data in printer memory.
Install additional printer
memory.
Message Description Action