Lowrance electronic Lowrance GlobalMap 7200C - Manual (Page 126)

118
Map Page showing results of a street search.
The cursor points to the located street.
If you want to navigate to the found street at the cursor location, just
press
MENU
|
ENT
|
EXIT
.
Find an Intersection
You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press
MENU
| ↓ to
F
IND
S
TREETS
|
ENT
and the Find
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press
ENT
to display the Find By Name menu. There are two options:
A.
You can
spell out
the street in the top selection box. Press ↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and re-
peat until the name is correct, then press
ENT
|
ENT
.
B.
Or you can jump
down to the lower box and pick a street from the
selection list
. Press
ENT
, then press ↓ or ↑ to select a street from the list and press
ENT
.
3. The Find Streets menu reappears with the street you're searching
for in the First Street box.
4. Now fill in the second street. Press
↓ to
S
ECOND
S
TREET
|
ENT
and the
Find By Name menu appears again. Just like before, there are two op-
tions:
A.
You can
spell out
the second street in the top selection box.
Press ↑ or ↓ to change the first letter, then press → to move the cursor
to the next letter and repeat until the name is correct, then press
ENT
|
ENT
.
B.
Or you can jump down to the lower box and pick the sec-
ond street from the
selection list
. Press
ENT
, then press ↓ or ↑ to select a
street from the list and press
ENT
.