Mounting the unit: bracket, in-dash or portable – Lowrance electronic Lowrance GlobalMap 7200C User Manual

Page 30

Advertising
background image

22

NOTE:

You do not need a Bus Adapter Cable with this unit if you use an
approved Devicenet NMEA 2000 connector. Approved Devicenet
NMEA 2000 connectors work with Lowrance red connector dis-
play units and components, so no adapter cables are needed.

Mounting the Unit: Bracket, In-Dash or Portable

You can install the GlobalMap on the top of a dash with the supplied

gimbal bracket. The GlobalMap 7200 and GlobalMap 7300 can also be

installed in the dash or mounted on a portable power supply.
If you use the supplied bracket, you may be interested in the optional R-A-
M

®

bracket mounting system. This converts the unit's gimbal bracket to a

swivel mount, which can be used on the dash or overhead mounting posi-

tions. Installation instructions are supplied with the R-A-M mounting

kits. R-A-M offers permanent mounts and temporary mounts suitable for

many vehicle types. See your Eagle dealer or visit the LEI web site

(

www.lei-extras.com

) for the latest options; accessory ordering information

is on the inside back cover of this manual. For a complete look at the

many mounting options, visit the RAM web site at

www.ram-mount.com

.

Optional R-A-M mounting system.

Bracket Installation
Mount the GlobalMap in any convenient location, provided there is clear-

ance behind the unit when it's tilted for the best viewing angle. You should

also make sure there is enough room behind the GlobalMap to attach the

power and GPS antenna/receiver module cables (Drawings beginning on

the next page shows the dimensions of the gimbal-mounted GlobalMaps.).
Holes in the bracket's base allow wood screw or through-bolt mounting.

You may need to place a piece of plywood on the backside of thin fiber-

glass panels to reinforce the panel and secure the mounting hardware.

Advertising