Lowrance electronic Lowrance GlobalMap 7200C - Manual (Page 65)

57
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the unit's memory.
2. The Transfer My Data menu includes a message that tells you if a
MMC is present or not. If no MMC is present, you must insert a card to
activate the Load or Save commands.
To transfer data from the GlobalMap to the MMC press
ENT
(for
S
AVE
).
To transfer data from the MMC to the GlobalMap press → to
L
OAD
|
ENT
.
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
S
AVE
D
ATA
|
ENT
. If you wish to rename the file (as
shown in the following figures), press
ENT
to activate the file name se-
lection box. Press ↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then, press
ENT
| ↓ to
S
AVE
D
ATA
|
ENT
.
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press
EXIT
.
These figures (left to right) show the menu sequence for naming and
saving a GPS Data File from the GlobalMap's memory to an MMC.