Lowrance electronic Lowrance GlobalMap 7200C - Manual (Page 59)

51
After you have looked up an item with the Find Waypoint command,
use the → to make sure the
G
O
T
O
command is highlighted at the top of
the screen, then press
ENT
. The GlobalMap begins showing navigation
information to the item.
To cancel navigation, press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ←
to
Y
ES
|
ENT
. The unit stops showing navigation information.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the Global-
Map as you travel. It's a travel history, a record of the path you have
taken. Trails are useful for repeating a journey along the same track.
They are particularly handy when you are trying to retrace your trip
and go back the way you came. On the screen, trails are represented by
a solid line extending from the back of the current position arrow.
The GlobalMap is set at the factory to automatically create and record
a trail while the unit is turned on. The unit will continue recording the
trail until the length reaches the maximum trail point setting (default
is 2,000, but the unit can record trails 9,999 points long). When the
point limit is reached, the unit begins recording the trail over itself.
By default, the trail flashes once a second, making it easier to see against
the background map. With the default auto setting, the GlobalMap cre-
ates a trail by placing a dot (trail point) on the screen every time you
change directions (The trail update rate and the methods used for creating
a trail can be adjusted or even turned off. See Sec. 5 for Trail Options.).
To preserve a trail from point A to point B, you must "turn off" the trail
by making it inactive before heading to point C or even back to point A.
When the current trail is inactive, the GlobalMap automatically begins
recording a new trail.
To Save a Trail
1. Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
.
2. Press ↓ to choose a trail in the Saved Trails List|
ENT
.
Sequence for saving a trail and beginning a new one. My Trails com-
mand (left). The arrow to the right of Trail 17 (center) indicates the
trail is "active" and the check to the left shows the trail is visible on the
map. The Edit Trail menu (right) with Active command selected.
Active
symbol
Visible
symbol