Lowrance electronic Lowrance GlobalMap 7200C - Manual (Page 79)

71
Edit a Waypoint
Waypoint Name
To edit waypoint name: 1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint
name|
ENT
| ↓ to
E
DIT
W
AYPOINT
|
ENT
|
ENT
.
2. Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press
ENT
then
EXIT
|
EXIT
|
EXIT
|
EXIT
to return to the previous page display.
Waypoint Symbol
To edit waypoint symbol: 1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint
name|
ENT
| ↓ to
E
DIT
W
AYPOINT
|
ENT
| ↓ to
C
HOOSE
S
YMBOL
|
ENT
.
2. Use arrow keys to select desired symbol and press
ENT
. To return to
the previous page, press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Waypoint Position
To edit waypoint position: 1. Press
WPT
|
ENT
|
ENT
|
ENT
| ↓ to waypoint
name|
ENT
| ↓ to
E
DIT
W
AYPOINT
|
ENT
.
2. Latitude: press → to
L
ATITUDE
|
ENT
. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT
.
3. Longitude: press ↓ to
L
ONGITUDE
|
ENT
. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
EXIT
.
4. When latitude and longitude are correct, return to the previous page:
press
EXIT
|
EXIT
|
EXIT
|
EXIT
.
Selecting a Waypoint
To select a waypoint on the map (for navigating, editing, etc.,) use the
arrow keys and center the cursor over the waypoint. A highlighted halo
will appear around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several posi-
tion readings and averaging them. This boosts waypoint position accuracy by
helping to eliminate errors caused by atmospheric conditions and other factors.
1. Press
WPT
| → to
S
UBCATEGORY
column| ↓ to
N
EW
|
ENT
.
2. Press ↓ or ↑ to
A
VERAGE
P
OSITION
|
ENT
|press → to
C
REATE
|
ENT
.
3. Wait while the unit takes points to average for the position (The
greater the number of points, the greater the accuracy.). When the de-
sired number of points accumulates, press
ENT
to create and save the
waypoint.
4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT
|
EXIT
or you can edit the waypoint.