Fuse replacement – Liebert UPSTATION GXT 2U User Manual
Page 26
Advertising
22
F
USE
R
EPLACEMENT
1. Remove the input fuse from the
fuse holder on the rear of the
unit.
2. Locate the spare input fuse that
is shipped with the UPS.
3. Insert the spare fuse into the
fuse holder, and reinstall assem-
bly into the UPS. Twist by hand;
rotate clockwise until fuse holder
locks into position.
4. Reconnect the input power cord
to input AC supply.
5. Restart the UPS. The UPS is ready for normal operation.
!
CAUTION
Before changing the input fuse, turn off the UPS, and
unplug the supply lead from the AC input supply.
Replace the fuse with the same type and rating.
Advertising