Lindy P16-IP - Manual (Page 22)

Section 4 IP Access Configuration & Operation
21
4.2 P16-IP Setup Tool
MAC Address Detection
Connect the P16-IP to your computer either via a local network, or via USB. If you use a USB
connection Windows will detect the P16-IP as a ‘Removable Disk’ and an appropriate drive
letter will be assigned.
Start the setup tool from the CD ROM.
A window opens as shown below:
On the upper left corner, the MAC address of the P16-IP is displayed. To detect the MAC
address, press the Refresh Devices button. The displayed MAC address is the same as that
printed on the label on the base of the unit.
On the lower right corner of the window, there are two buttons: Query Device and Setup
Device. Press the Query Device button to display the preconfigured values of the network
configuration. The values are displayed in the text fields located above. If necessary, adjust the
network settings to your needs. To save the changes enter a user login and a password (see
Authentication, on page 22) and then press the Setup Device button.