Lindy P16-IP - Manual (Page 57)

Section 4 IP Access Configuration & Operation
56
Note: The P16-IP has its own independent real time clock. Make sure the time setting of the
P16-IP switch is correct. (See the Section called Date and Time on page 63)
Enable Dynamic DNS
Enables the Dynamic DNS service. This requires a configured DNS server IP address.
Dynamic DNS server
This is the server name where the P16-IP registers itself in regular intervals. At the time of
writing, this is a fixed setting since only dyndns.org is currently supported.
Hostname
This is the hostname of the P16-IP that is provided by the Dynamic DNS Server. (Use the whole
name including the domain, e.g. testserver.dyndns.org not just the actual hostname).
Username
You have registered this username during your manual registration with the Dynamic DNS
Server. Spaces are not allowed in the nickname.
Password
The password used during manual registration with the Dynamic DNS Server.
Check time
The P16-IP registers itself in the Dynamic DNS server at this time.
Check interval
This is the interval for reporting again to the Dynamic DNS server by the P16-IP.