Lindy P16-IP - Manual (Page 28)

Section 4 IP Access Configuration & Operation
27
4.5 Logging In
Login to the P16-IP
Launch your web browser. Direct it to the address of your P16-IP which you configured during
the installation process. The address used might be a plain IP address or a host and domain
name if you have given your P16-IP switch a symbolic name in the DNS.
Example: Type the following in the address line of your browser when establishing an
unsecured connection:
http://<IP address of P16-IP>
When using a secure connection, type in:
https://<IP address of P16-IP>
This will lead you to the P16-IP login page as shown below:
The P16-IP has a built-in super user account that has all the permissions enabled to
administrate your P16-IP switch:
Login name super (factory default)
Password pass (factory default)
Please note: Your web browser has to accept cookies, or else login is not possible.
Please make sure you change the super user password immediately after you have installed
and accessed your P16-IP for the first time. Not changing the password for the super user is a
severe security risk and could result in unauthorized access to the switch and to the host
system(s) to which it is connected.
Note: The user “super” is not allowed to login via the serial interface of the IP-KVM switch.