Lindy P16-IP - Manual (Page 64)

Section 4 IP Access Configuration & Operation
63
Date And Time
Here you can set the internal real-time clock of the P16-IP. You can adjust the clock manually or
use an NTP timeserver. Without a timeserver your time setting will be lost if the P16-IP is
powered down for more than a few minutes. To avoid this, you can use an NTP timeserver
which sets up the internal clock automatically to the current UTC time. Because the NTP server
time is always UTC, there is a setting that allows you to set up a static offset to get your local
time.
Note: The P16-IP does not adjust to daylight saving time automatically. So you have to set
up the UTC offset according to the local conventions of your country.