Lindy P16-IP - Manual (Page 70)

Section 4 IP Access Configuration & Operation
69
Unit Reset
This section allows you to reset specific parts of the device. This involves the keyboard and
mouse, the video engine and the P16-IP itself.
Resetting the unit itself is mainly needed to activate a newly updated firmware. It will close all
current connections to the administration console and to the Remote Console.
The whole process will take about half a minute. Resetting sub devices (e.g. the video engine)
will take a few seconds only and does not result in connections closing. To reset individual P16-
IP functionality, click on the Reset button.
Note: Only the super user is allowed to reset the P16-IP.