Proxima ASA Multimedia LCD Projectors - Manual (Page 10)

User’s Guide • 1–5
Chapter 1 • Introducing the Proxima ® Desktop Projector
✍
CAUTION: The lamp comes on automatically when you turn
on the projector. DO NOT LOOK DIRECTLY INTO THE
LENS WHEN THE LAMP IS ON! Your vision can be damaged
by the brightness of the light.
9. Plug in the projector. Turn on the projector and any external
monitor before you turn on the computer, so that the
computer properly senses the projector during its start-up
routine.
10. Rotate the projector’s focus ring until the title screen image is
clear and sharp.
Connector Function/Cable Connections
RS-232 For optional Cyclops system or
Presentation Control
Software
- Din 8-to-DB9 IBM serial data
cable (C936-6)
- Macintosh ADB data cable
(C470-6) for Cyclops
- Macintosh serial data cable
for Mac Remote (C934-6)
Installation instructions included
with Cyclops system or
Presentation Control software
COMPUTER Connects computer video to
projector
- VGA video “Y” cable (C454-6)
- Macintosh video “Y” cable
(C464-6)
Projector: LCD
Monitor: MONITOR
IBM: COMPUTER/VGA
Mac: CPU/MAC II
S-VHS
(Audio/video -
enabled
models) S-VHS or S-Video input
- S-Video cable (C466-6)
Projector: S-VHS
- Mini Din 4
Source: VIDEO OUT
- Mini Din 4
VIDEO IN
(Audio/video -
enabled
models) Video input from NTSC, PAL, or
SECAM
- Composite video/audio cable
(C497-6)
Projector: VIDEO IN
- Yellow RCA plug
Source: VIDEO OUT
- Yellow RCA plug
AUDIO IN Audio input from
NTSC/PAL/SECAM/S-VHS
source or microphone
- Composite video/audio cable
(C497-6)
Projector: L/R AUDIO IN
- White (L)/Red (R) RCA plugs
Source: L/R AUDIO OUT
- White (L)/Red (R) RCA plugs
COMPUTER
AUDIO IN Audio input from computer or
microphone
- Computer audio cable
(C498-6)
Projector: COMPUTER AUDIO IN
- RCA plugs
Source: AUDIO OUT
- Mini jack
AUDIO OUT Connects an external speaker
system
- Computer audio cable (C498 -
6)
Projector: AUDIO OUT
- Mini jack
External Amplifier: L/R AUDIO IN
- L/R RCA plugs