Proxima ASA Multimedia LCD Projectors - Manual (Page 36)

User’s Guide • 2–21
Chapter 2 • Detailed Setup
Turning On/Off the Lamp
When you first turn on the projector, the lamp will be on. To
turn the Desktop Projector's lamp off, press the LAMP key on the
Control Panel or remote control. Pressing the LAMP key again
will turn the lamp on. The lamp turns on slowly to prolong lamp
life.
Brightness
Sync
Volume
Video
Menu/
Lamp
OVERTEMP
REPLACE LAMP
Figure 2-16
The LAMP key
Note: Turning the lamp off does not cut power to the
projector. The fans will still operate. You must move the AC
POWER switch to the OFF position to completely power down
the projector.