Proxima ASA Multimedia LCD Projectors - Manual (Page 35)

2–20 • User’s Guide
Chapter 2 • Detailed Setup
CAUTION! Locate the air intake and exhaust grills on the top
cover and to the left and right sides of the projection mirror
assembly, and the exhaust grills on the rear panel and side of the
projector. Never operate the projector if these grills are clogged or
obstructed, or if the electric fans are not running.
Figure 2-15
Allow for proper air flow!
CAUTION! The lamp chamber gets very hot during
operation. In particular, the ceramic socket at the lamp’s base can
get extremely hot! Use appropriate care when opening the lamp
chamber or changing lamps. Make sure that the lamp chamber
and lamp have cooled for at least 6 minutes with the fan running.
To do so, press the LAMP button to turn off the lamp and allow
the fan to operate for several minutes.
Note: If you turn the Desktop Projector off while the rest of
your computer system is running, your external monitor will go
blank. This is normal. Just turn the Desktop Projector on again
and your monitor display will return.
☞
☞