Proxima ASA Multimedia LCD Projectors - Manual (Page 30)

User’s Guide • 2–15
Chapter 2 • Detailed Setup
Note: Although both COMPUTER AUDIO IN and AUDIO
IN may be connected simultaneously, only one is active.
• If computer video is selected, COMPUTER AUDIO IN is
active.
• If NTSC/PAL/SECAM/S-VHS video is being viewed,
AUDIO IN is active.
Connecting a Monaural Source
If you have a monaural source that you want to play through the
Desktop Projector’s left and right speakers, use the RCA “Y”
adapter cable (C496) to connect the source to the projector’s left
and right AUDIO IN connectors. If you are using computer
audio, connect the source to the projector’s Left and Right
COMPUTER AUDIO IN connectors.
Connecting a Microphone
When you need to address a larger audience while projecting an
NTSC, PAL, SECAM or S-VHS video image, plug an amplified
or wireless microphone equipped with a line level output
(maximum level of 1 volt, peak-to-peak) into the Left and Right
AUDIO IN connectors. The microphone will work when an
NTSC, PAL, SECAM or S-VHS video image is projected. If you
wish to address a larger audience while projecting a computer
image, connect the source to the projector’s Left and Right
COMPUTER AUDIO IN connectors.
If your microphone’s amplifier has only one output, use the RCA
“Y” adapter cable (part number C496) and a standard RCA cable
to connect it to both of the projector’s AUDIO IN or
COMPUTER AUDIO IN connectors.