Proxima ASA Multimedia LCD Projectors - Manual (Page 59)

User’s Guide • 4–5
Chapter 4 • Maintenance
Figure 4-4
Push the release lever to release the lamp
6. To close the chamber, firmly press down on the center rear
edge of the cover until it latches. The lamp chamber latch will
return to the center position. The power plug is now
accessible.
7. Replace the power cord.
Changing Air Filters
To assure proper cooling, change or clean the three air intake
filters after every 250 hours of operation. These filters are located
on the left and right sides at the front of the projector’s lower case
and under the grill in the top cover.