Philips AVCHD HDC-TM20 - Manual (Page 12)

12
VQT2B30
13 SD card open lever [OPEN] (l 23)
14 Audio-video output terminal [A/V]
(l 92, 108)
≥ Use the AV cable (only the supplied cable).
15 Component terminal [COMPONENT]
(l 92)
16 HDMI mini connector [HDMI] (l 92, 97)
17 Access lamp [ACCESS] (l 9, 23)
18 Card slot (l 23)
19 SD card cover (l 23)
20 Built-in flash (l 65)
21 Lens (LEICA DICOMAR)
22 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood.
≥ When fitting the tele conversion lens
(VW-T4314H; optional) or the wide conversion
lens (VW-W4307H; optional), first remove the
lens hood.
23 Remote control sensor (l 38)
24 Recording lamp (l 29)
25 Video light (l 54)
Lens cover A
≥The lens cover opens in
recording mode. (l 24)
20 21
22
23
24
25
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the
4 corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
≥ When the filter kit (VW-LF43NE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
≥ To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.