Philips AVCHD HDC-TM20 - Manual (Page 45)

45
VQT2B30
4
Press the recording start/stop
button to start recording.
≥ While recording is in progress, the recording
will not stop even if the LCD monitor is closed.
5
Press the recording start/stop
button again to pause recording.
≥ The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
≥ Maximum number of recordable scenes: 3900
Maximum number of different dates: 200 (l 76)
When either of them reaches to the maximum limit, more scenes cannot be recorded.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
≥ Still pictures can be recorded while recording the motion picture. ( l 48)
∫ Screen indications in the
recording mode
A Recording mode
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
C Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset to
“0h00m00s”.
About the compatibility of the recorded motion pictures
≥ They are not compatible with devices other than those that support AVCHD. Images cannot be
played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your
equipment supports AVCHD by referring to the operating instructions.
≥ There are some cases where the recorded motion pictures cannot be played back, even if the
device supports AVCHD. In such cases, play the recorded motion picture with this unit instead.
0h00m00s 0h00m00s 0h00m00s
R 1h20m R 1h20m R 1h20m HG