L 65), Sh (l 65), Self-timer – Philips AVCHD HDC-TM20 User Manual
Page 65: Select the menu. ( l 27), Built-in flash
65
VQT2B30
Function
Effect/Setting method
Self-timer
This is for recording still pictures using the timer.
≥ Change the mode to
.
Select the menu. (l 27)
[PICTURE]
# [SELF TIMER] # [10 SECONDS] or [2 SECONDS]
[10 SECONDS]:
Records after 10 seconds
[2 SECONDS]:
Records after 2 seconds
≥ When the
button is pressed, a still picture is recorded after
the Ø10 or Ø2 display and the recording lamp flashes for the
time which has been set.
≥ After recording, the self-timer is cancelled.
≥ In auto focus mode, if the
button is pressed halfway once
and then fully, the lens focuses on the subject when the button is
pressed halfway.
≥ If the
button is pressed fully all at once, the lens focuses on
the subject just before recording.
To stop the timer midway through
Press the MENU button.
Built-in flash
When the
button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
≥ Change the mode to
.
Select the menu. (l 27)
[PICTURE]
# [FLASH] # [AUTO] or [ON]
≥ This function’s default setting is [AUTO].
≥ When the
button is pressed halfway, the flash indicator will
appear in the bottom left corner of the screen.
[ON]:
ß
[AUTO]:
ßA
[OFF]:
≥ The unit automatically determines if the flash is necessary even
when it has been set to [OFF] by detecting the ambient
brightness. (If it determines that the flash is necessary, the
indication lights up in red when the
button is pressed
halfway.)
∫ To adjust the brightness of the flash
≥ The intelligent auto mode is set to off. (
l 40)
Select the menu. (l 27)
[PICTURE]
# [FLASH LEVEL] # desired setting
[ßj]: Less brighter
[ßd0]: Normal
[ßi]: Much brighter