Philips AVCHD HDC-TM20 - Manual (Page 80)

80
VQT2B30
4
Select the playback operation by
touching the operation icon.
1/;: Slide show (playback of the still pictures
in numerical order) start/pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
∫: Stops the playback and shows the
thumbnails.
≥ Operation icon disappears if no playback
operation is performed for about 3 seconds. It
will be displayed again if you touch the screen.
∫ Change the thumbnail display
During step 3, the thumbnail display changes in
the following order if the zoom lever is operated
to
_
side or
`
side.
20 still pictures () 9 still pictures () 1 still
picture
≥ 9 still pictures display returns if the power is
turned off or the mode is changed.
∫ Changing the playback settings
for the slide show
1) Touch .
2) Touch the interval of playback for the slide
show.
[SHORT]:
Approx. 1 sec
[NORMAL]:
Approx. 5 sec
[LONG]:
Approx. 15 sec
3) Touch the desired sound.
≥ During slide show or audio testing, the speaker
volume can be adjusted by the volume lever.
(l 73)
(To test the music audio)
Touch [START] and start the audio testing
≥ Touch the other music option to change the
music to be tested.
≥ When you touch [STOP], the music playback
stops.
4) Touch [ENTER].
W T
/ VOL